News
A plastic shutter exhaust fan such as the APB/SAB model is a wall-mounted axial exhaust option for spaces such as kitchens, bathrooms, hotels, shops, and public buildings. Choosing the correct model starts with the opening and required airflow duty, then checking the product table and installation conditions together.
What the product page lists
The indblower.com product page identifies this product as a plastic shutter exhaust fan and lists four APB models. The values below reproduce the website’s current product table; confirm the final selection against the latest catalogue and the actual installation conditions.
| Model | Listed size | Power | Voltage | Air volume | Noise | Usable area |
|---|---|---|---|---|---|---|
| APB15-SHI | 6 in (one-way, with mesh) | 24 W | 220 V | 300 m³/h | 39 dB(A) | 12–24 m² |
| APB20-SHI | 8 in (one-way, with mesh) | 28 W | 220 V | 550 m³/h | 41 dB(A) | 22–44 m² |
| APB25-SHI | 10 in (one-way, with mesh) | 36 W | 220 V | 900 m³/h | 42 dB(A) | 36–72 m² |
| APB30-SHI | 12 in (one-way, with mesh) | 48 W | 220 V | 1,200 m³/h | 46 dB(A) | 48–96 m² |
Check the opening before comparing models
Measure the available wall opening and confirm the mounting space, wall thickness, and access for installation. Match the opening to the listed model size; do not assume that the nominal fan size is the exact cut-out dimension. Obtain the installation drawing or confirm dimensions with the supplier before cutting or ordering.
Match airflow to the room and air path
Use the listed air-volume figures as product data, not as a guaranteed airflow in every installation. The actual result depends on the room layout and the path available for replacement air. Check where air will enter the room, whether furniture or partitions interrupt the path, and where the exhaust will discharge. If the fan connects to a duct or faces additional resistance, ask for confirmation that the selected model suits that arrangement.
Review operating conditions and electrical details
The current product table lists 220 V for these four models. Confirm that the supply at the installation point matches the product requirements and have electrical work completed by a qualified installer. Also consider the room’s operating hours, exposure to moisture or cleaning, and whether the plastic construction is suitable for the site conditions. The product page describes typical applications, but it does not replace a site-specific check.
Use the listed area as a screening guide
The product table includes a “Usable Area” range for each model. Treat this as an initial screening reference rather than a substitute for assessing room volume, occupancy, heat or moisture sources, replacement-air openings, and any connected ductwork. Where these conditions are unusual, provide the details to the supplier before finalizing the model.
Selection checklist
- Confirm the application is suitable for this plastic shutter exhaust fan.
- Measure the opening and available mounting space.
- Compare the APB model’s listed air volume, power, voltage, noise, and usable-area range.
- Check the replacement-air route and exhaust discharge location.
- Confirm whether a duct, grille, mesh, or other accessory is part of the required configuration.
- Verify the current product information and installation details before purchase.
Frequently asked questions
Which spaces does this product page identify?
The page lists kitchens, bathrooms, hotels, shops, and public-building ventilation as typical applications. Confirm suitability for the specific room and operating conditions.
Which APB/SAB model should I choose?
Start with the opening size, then compare the listed product data and the room’s air path. The product page lists APB15-SHI, APB20-SHI, APB25-SHI, and APB30-SHI; final selection should be checked against the installation requirements.
Can I use the listed air volume as the expected installed airflow?
Use it as the product-page figure for comparison. The page does not establish the airflow for every site configuration, so confirm performance for the actual opening and any connected ductwork.
Where can I check the product details?
See the APB/SAB Plastic Exhaust Fan with Shutter product page on indblower.com, and contact the supplier if you need installation dimensions or configuration confirmation.